Post a picture of your Altair.

harnas · Post by **harnas** » April 26th, 2015, 6:17 am

Here is mine, while loading the 8K BASIC

I love to play some tapes on that 8-track player while using the Altair :)

JNZ · Post by **JNZ** » April 26th, 2015, 11:56 pm

I posted a different setup with Cool-Retro-Term running on my x201t, but here's my current setup:

larger: http://i.imgur.com/HGlYGWk.jpg

The thing on the far right is a Raspberry Pi, and its only role in this retro goodness is to transfer disk images over serial.

snuci · Post by **snuci** » May 21st, 2015, 7:53 am

I'm a new member here and am very happy to say that I just got my Altair Clone. Here's mine on top of a MITS Altair 8800.

: Altair Clone (top) with MITS Altair 8800 (bottom); Altair-Clone-with-Mits-Altair-on-bottom.jpg (110.59 KiB) Viewed 18308 times

More pictures and a blog posting here: http://vintagecomputer.ca/altair-clone- ... ifference/

waltermixxx · Post by **waltermixxx** » June 5th, 2015, 1:38 pm

Here is mine :)

Caterman · Post by **Caterman** » July 12th, 2015, 3:19 pm

My mini Altair
No not really, this is my serial switch.
This allows me to have my Altair connected to my printer, paper tape punch, pocket term ACR to PC serial port 1 to PCs
In fact along with the PCs connection from the pocket term I have 3 serial connections to 3 instances of Terra Term.
This covers all my needs at present! without having to disconnect a serial lead.

mail@gabrielegan.com · July 12th, 2015, 3:27 pm

I'd buy one of these if you're selling them: I'm using a bunch of off-the-shelf switch-boxes and the results aren't anything like as good as this.

Post by **AltairClone** » July 12th, 2015, 6:10 pm

Now that is cool!

Caterman · Post by **Caterman** » July 13th, 2015, 5:38 am

Glad you like it. I'm sorry but I won't be selling these!
Trouble is the enclosure is a very old data switch box I had kicking about. Plus I'm in the UK.
You could convert another box, I was lucky, had this one kicking about that had 3 - 9pin serial 3 - VGA sockets and 3 Keyboard Sockets.
I have used 5 out of the 6 DB9 holes for 9 pin serial sockets and 3 - trailing input leads that connect to the Clone, go through the keyboard holes.
Best I can do is upload the artwork.

mail@gabrielegan.com · July 14th, 2015, 5:09 am

I'm in the UK too -- are you anywhere near the Midlands? I'd love to see your setup and discuss these amazing machines Mike has built. I'm at De Montfort University in Leicester.

Caterman · Post by **Caterman** » July 16th, 2015, 4:02 pm

Here's a snap of my humble setup.
I'm based in a small village next to the Channel Tunnel Terminal near Folkestone.

AltairClone.com

Post a picture of your Altair.

Re: Post a picture of your Altair.

Re: Post a picture of your Altair.

Re: Post a picture of your Altair.

Re: Post a picture of your Altair.

Re: Post a picture of your Altair.

Re: Post a picture of your Altair.

Re: Post a picture of your Altair.

Re: Post a picture of your Altair.

Re: Post a picture of your Altair.

Re: Post a picture of your Altair.

Who is online