Re: Serial port settings for a real Teletype
Posted: August 17th, 2019, 5:43 pm
kwiebe wrote:I have port 2 connected to the TTY and configured SIO so I could slow it down to 110. It is currently set to 7E2.
This confuses me. The SERBUF program doesn’t even support the SIO port other than as the Altair cassette (e.g., “SERBUF A”). You mention using a “SERBUF 2” command, which uses the second port on a 2SIO and sets 2 stop bits - not an SIO.
Mike