Does anyone know if the Clone Cassette adapter can work with Martin Eberhard's 88-2SIOJP serial port board? I know you can set either of the two ports on the board as TTL levels
but I don't know if that would work with the Cassette adapter. Also in a system with +8v and +/-16v, where would I get the 3.3v needed for the adapter?
If you know a way I can get it to work, PLEASE let me know with precise instructions! I'm not a hardware person (just look at my other posts to verify that!)
so I'd need "Connect the RX line to pin 4 of the serial port board, then connect the TX line to..." type of instructions.
Thanks for any help you could give!