jrdurgan wrote:I am using teraterm as the communication program.
J Durgan
p.s. thanks so much for the reply.
OK, then. Once you get the message to send the hex file, click on:
1. File
2. Send file...
A file selection window will pop up.
3. Navigate to the directory containing your file
4. Click on the file you want to send.
That's it. The file will begin transferring automatically. You should see activity in the terminal as data comes in.
You may have to adjust the throttle delay in AltairDuino's configuration menu and/or the Transfer Delay in TeraTerm's Serial port setup menu.
I find that at 9600 baud a throttle delay of 7 and a delay of 5 msec/line in TeraTerm works best for me.
Tom L