RBBS BBS software running on Altair Clone

General discussions related to the Altair 8800 Clone

RBBS BBS software running on Altair Clone

Postby gmh » November 14th, 2015, 4:57 pm

Hi all,

I had a bit of time on my hands so I wanted to see about getting a BBS running on the Altair Clone. RBBS seemed like the perfect choice since it is written in BASIC, and was designed to work with CP/M. I haven't done too much testing yet, but this seems to run as expected.

Be sure to check out the comments at the start of the source code to configure to your liking.

RBBS BBS running on the Altair Clone;
Screen Shot 2015-11-15 at 08.52.57.png

Next step, when I have time is to make this work over telnet.
Attachments
RBBS25.BAS.zip
RBBS ver 2.5 (ASCII dump of the BASIC source code)
(8.45 KiB) Downloaded 171 times
gmh
 
Posts: 38
Joined: August 12th, 2014, 5:19 am
Location: Melbourne, AU

Re: RBBS BBS software running on Altair Clone

Postby AltairClone » November 16th, 2015, 10:36 am

Let us know when you're ready for some of us to "dial" in!

Mike
AltairClone
Site Admin
 
Posts: 291
Joined: April 5th, 2013, 10:55 am

Re: RBBS BBS software running on Altair Clone

Postby Synoptic » March 1st, 2016, 10:17 am

Hey, I could pout this on my online altair at http://www.micronick.com/altair !

I do not have a lot of time on my hands, so I will gladly take a pre-configured disk with a compiled version on it! anyone want to help me with this ? I think it could be really fun ! We could maybe keep the Zork Games as doors ?
Synoptic
 
Posts: 30
Joined: February 28th, 2014, 2:15 pm

Re: RBBS BBS software running on Altair Clone

Postby virtualaltair » December 1st, 2016, 11:08 am

Mike Douglas ported the BYE.ASM code to use a 2SIO port 2 with CTS Enabled. BYE.COM plus XMODEM.COM form a simple Remote CP/M (RCP/M).

I set up Telnet access and have a simple message system based in MINI-RBBS.

I downloaded the code for RBBS and will get set up to compile it. Adding RBBS to my RCP/M turns the system into a BBS

Tom
virtualaltair
 
Posts: 19
Joined: June 20th, 2013, 11:47 pm
Location: New Mexico, USA


Return to General Discussions

Who is online

Users browsing this forum: No registered users and 1 guest

cron